The Most Effective Way to Filter Pond Water

One of the common misconceptions consumers have today about pond ownership is that maintenance is tedious and time consuming. This simply isn’t true when proper steps are taken to create a pond ecosystem that works with Mother Nature, not against her.

Aquascape Ecosystem Illustration

In addition to plants, fish, aeration, rocks and gravel, a low-maintenance ecosystem pond requires adequate filtration to help keep the water crystal clear.  Three types of pond filters are available on the market and include biological, mechanical, and sterilizers.  Biological filters use bacteria to break down pond wastes, converting them into less harmful compounds that can be used as aquatic plant fertilizers.  Mechanical filters trap and remove debris and sediment.  Water sterilizers pass water through a tube that houses an ultraviolet bulb, killing living microscopic particles in the water.

A good biological filtration system, teamed with a proper mechanical filter to remove solids before the water enters the biological filtration unit, is the most effective way to filter water.  With adequate biological and mechanical filtration, the need for sterilizers is eliminated altogether, thereby ensuring a natural ecosystem pond.

The Job of a Skimmer

The main function of mechanical filtration, or skimmer, is to remove debris before it sinks to the bottom of the pond and decays. The skimmer also houses and hides the pump and plumbing from view, as opposed to being placed directly in the pond where they become an eyesore.  The skimmer won’t drain the pond if a possible leak occurs in either the plumbing or waterfalls.

There are two main types of skimmers: box skimmers and floating skimmers.  Both types filter the water by removing floating debris and waste before it’s had a chance to fall to the bottom of the pond.  The box skimmer is the predominant type of skimmer on the market today because it’s easy to maintain.

Box-style skimmers come with either vertical or horizontal filter mats.  Horizontal mats prove to be the most effective, while providing the least amount of maintenance. In addition to frequent cleaning, vertical mats need to be constantly monitored to make sure there is enough water in the pump chamber for the pump to operate properly.  An advantage of horizontal filter mats is that they lay flat so there is no sagging and they don’t lose their shape.  They also never clog to the point of preventing water from passing through, so the pump chamber does not run dry.

As water enters the skimmer, the large debris is removed and the water is then further filtered through the horizontal mat.  The pond water then travels through the plumbing buried underground, up to the biological filter where it’s further treated before re-entering the pond.

Biological Filtration Goes to Work

The biological filter receives water that has already passed through the mechanical filter, or skimmer, typically placed on the opposite side of the pond.  The water enters the biological filter via flexible pipe located near the base of the unit.  The water then flows from the bottom to the top of the filter, traveling through filter media housed inside the unit.  The filter media helps with the removal of fine to medium-sized particles.  The larger debris was already removed by the skimmer.

As the biological filter fills, it will overflow and cascade over its waterfall lip, cascading down rocks that have been set to create a beautiful and preferably natural-looking waterfall.  The waterfall creates aeration for the pond, assisting in the circulation and health of the water.  If a slower, stream effect is preferred, the unit simply needs to be sunk lower into the ground.

Biological filters on the market today range in size. For larger ponds, multiple biological filters can be incorporated into the design.

Waterfalls aid in filtration

The Science Behind the Design

Mechanical and biological filtration are critical to processing the many types of nutrients found in a water garden system, including fish waste, uneaten fish food, leaves, and runoff from lawns to name a few.  High levels of ammonia (a form of nitrogen) are highly toxic to fish and are a major contributor to prolific algae growth, and so they need to be carefully controlled.  In water gardening, the primary nutrient that biological filtration utilizes and renders usable is nitrogen.

In biological filtration, nitrifying bacteria, known as facultative bacteria, absorb ammonia, and turn nitrites into nitrates, which are less dangerous.  These bacteria require oxygen to live, so it’s important for the pond’s pump to run 24 hours a day, 7 days a week.  If the pump isn’t running, the waterfalls aren’t flowing, and aeration is eliminated from the necessary equation to maintain an ecosystem pond.  Keep in mind that if the pump shuts down, the bacteria will quickly use up all of the oxygen and die.  This isn’t a good thing.

Nitrates are then removed from the pond by another biological filtration method known as de-nitrification.  This process occurs only in anaerobic (without oxygen) areas of the pond.  That’s why it’s not necessarily bad for some areas of the pond to experience minimal water flow (such as on the bottom of the pond, under an inch or so of gravel).  The bacteria that live in this area of the pond turn nitrates into nitrogen gas, which is released into the atmosphere.  Nitrates are also absorbed by aquatic plants and algae during their growth processes.  A pond without aquatic plants will prove to be a maintenance nightmare.

For any biological filtration to work, there literally needs to be billions of bacteria working to purify the water.  They prefer to anchor onto things, which is why surface area is so important.  More surface area means more bacteria, and more bacteria means better biological filtration.  Surface area is provided by filter media, rocks, and gravel.  A pond with gravel on the bottom will contain more surface area for bacteria, as opposed to a pond with exposed liner on the bottom.

The Role of Aquatic Plants

Another important component to pond filtration is the use of plants. Many gardeners add a pond to their landscape for the variety of aquatic plants available, and while their beauty is certainly an aesthetic asset; a critical benefit is the work these plants do to help filter the water. Plants help purify pond water by reducing nutrients, filtering out sediments and absorbing toxic compounds through the process of phytoremediation.

Aquatic Plants Help with Filtration

If these excess nutrients are not removed, algae will feed on them, resulting in green water, string algae, or both. Algae control is not the only way plants help create a low-maintenance ecosystem pond. Submerged and marginal plants also provide food, shade, and protection for the fish and other wildlife that live in and around the pond.

 

Low-Maintenance Customers

To keep pond water quality high, the simple process of repeatedly turning the water over through the mechanical and biological filters is needed in order to create a naturally balanced, low-maintenance ecosystem pond.  Add the remaining components of plants, fish, aeration, rock, and gravel, and you’ll find greater success in creating easy-to-maintain water gardens for your customers.

When your customers spend less time fiddling in the backyard on pond chores, it means they can enjoy more leisure time relaxing by their backyard oasis.  And as a pond builder, it also means you’ll spend less time trouble-shooting calls and can instead focus on cultivating and growing new and existing customers.  Less stress for your customers translates into less stress and greater profits for you!

Read more here at Aquascape.

Facebooktwittergoogle_pluslinkedinyoutube

Leave a Reply

Your email address will not be published. Required fields are marked *